美曰韩欧免费小视频|日韩性爱无码视频|国产免费区亚洲免费区|黄色Av播放宅男久久一区

Problems to be aware of when installing the inverter

1. Avoid vibration and shock. In order to prevent the vibration and impact generated by the equipment from being in contact with the inverter equipment, the installation place of the inverter should be away from the vibration source and the impact source. It is also necessary to use the damping rubber pad to fix the electromagnetic switch in the control cabinet and other components that are easy to generate vibration.

2, the working temperature can not be too high, the operating temperature of the inverter should be controlled below 40 °C, and strictly follow the installation requirements in the product manual, absolutely not allowed to install the heating components close to the bottom of the inverter, affecting the heat dissipation of the inverter ,

3. When the inverter is working, it will generate a lot of interference electromagnetic waves, for nearby instruments,The instrument has some interference. Therefore, the instrument and electronic system in the cabinet should be made of metal casing.Shielded, components are reliably grounded. In addition, the inverter control line and power line should be dividedWiring, do not bundle each wire into a bundle of wires. Various electrical components, instruments and instrumentsShielded control cables should be used for the traces between the tables. If not handled properly, electromagnetic interference willThe entire system is not working.