美曰韩欧免费小视频|日韩性爱无码视频|国产免费区亚洲免费区|黄色Av播放宅男久久一区

First, injection molding machine, hydraulic press power saving work introduction

    The hydraulic system of the injection molding machine is a system with large fluctuations in pressure and flow. The pressure and flow rate must change regularly during different working stages such as mold opening, mold clamping, injection molding, material returning and ejection. Most of the time, the actual fuel consumption of the load is less than the oil supply of the oil pump, causing the hydraulic oil in the high pressure state to overflow through the hydraulic components such as the relief valve and the proportional valve. The overflow portion not only does not have any useful work, but also generates heat, causing the hydraulic oil to generate heat, which is both energy consuming and harmful. According to the current working state of the injection molding machine, such as mold opening, mold clamping, shot glue, material return, ejection, etc., as well as high pressure and speed requirements, the speed of the oil pump is automatically adjusted to adjust the oil supply of the oil pump so that the oil pump is actually supplied. The oil quantity and the actual load flow rate of the injection molding machine are consistent at any working stage, so that the overflow part of the hydraulic oil is lost, the overflow phenomenon is completely eliminated, the oil pump output is reduced, and the power consumption of the oil pump motor is saved. The frequency conversion energy-saving controller uses the principle of controlling the oil supply motor at different stages to provide the corresponding rotation speed, so that the quantitative pump becomes an energy-saving variable, so as to achieve the purpose of energy saving of the injection molding machine.

Second, the energy consumption analysis of injection molding machine

a. Where is there a serious waste in the injection molding machine?

    99% of injection molding machines use hydraulic transmission and electro-hydraulic proportional control technology. The hydraulic system process of installing quantitative pumps is generally divided into clamping, injection, melting, holding, cooling, mold opening, thimble, standby (semi-automatic), etc. In each stage, the pressure and flow required for each stage are different. For the oil pump motor, the injection process is in a changing load state. In the hydraulic system of the dosing pump, the rotational speed provides a constant flow rate, and excess hydraulic oil is returned through the overflow valve. This process is called high pressure throttling. According to statistics, electrical energy losses are as high as 35%-70%.

b. What is the proportion of the power consumption of the injection pump oil pump motor in the whole process of production?

    According to the requirements of the injection molding machine equipment process, the power consumption of the injection pump oil pump motor accounts for more than two-thirds of the total power consumption of the equipment. Great energy saving potential.

c. What is the status of the international injection molding machine?

    With the increasingly strict requirements of environmental protection in the world, such as energy consumption, noise, leakage, etc., the energy-saving system of injection molding machines has become the focus of research. In view of the large energy loss of the valve-controlled electro-hydraulic control system, Germany, Japan and other countries have begun to study the load-sensing injection molding electro-hydraulic control system combined with the electro-hydraulic proportional valve. To further reduce energy consumption and reduce costs. The motor uses a motor with an adjustable speed to drive a hydraulic pump as a power source. Energy saving and noise reduction are achieved under the conditions of constant pressure, cooling and idle running conditions.

Third, injection molding machine, hydraulic machine power saving transformation principle

1. Power saving retrofit solution using proportional valve control

    The flow rate Q of the injection pump is proportional to the pump speed n. As long as the speed of the pump motor is changed, the pump speed can be changed, thus changing the pump's oil absorption. An economizer is added in front of the oil pump motor, and the speed signal of the economizer is taken from the driving signal of the proportional flow valve (0-1A), so that the output speed of the economizer is synchronized with the flow rate of the injection valve proportional flow valve. For example, the actuator requires 50% flow, and the economizer drives the motor (Ne=1500) to provide 750 rpm. The motor drives the pump to extract 50% of the flow from the cylinder. The part of the flow that does not extract the overflow will not cause unnecessary waste. During the special cooling and discharging process, the oil pump does not draw the flow from the cylinder at all, and the motor can be completely stopped without consuming electricity. It is in complete agreement with the whole process of the injection molding machine, and achieves high efficiency and energy saving without affecting production efficiency.

2. Injection molding machine energy-saving inverter features

    The special energy-saving frequency converter suitable for energy-saving and automatic transformation of injection molding machine adopts excellent control strategy to make it have fast dynamic response, advanced current limiting technology and hardware optimization design, so that the product has super overload capability and can guarantee When the load fluctuates frequently, the energy-saving inverter does not trip. And has the following characteristics:

a. High reliability

Perfect reliability design: such as redundant design, derating design, etc. All components are in industrial or military grade, all key components are imported components, and all key circuits are highly integrated thick film IC, thus ensuring the whole machine. Reliability

b. High power saving rate

Keep the original control mode of the injection molding machine unchanged, and adopt advanced microcomputer control technology to make the quantitative pump become energy-saving variable pump. The hydraulic system of the injection molding machine matches the power required for the whole machine operation, and there is no high-pressure throttling overflow energy. Loss, increase the power factor of the pump motor to 0.96 or above, the power saving rate is generally 25% to 65%, and all investment can be recovered within 6~8 months.

c. Soft start energy saving

    Since the motor is directly started or Y/Δ started, the starting current is equal to (3-7) times the rated current, which will cause serious damage to the electromechanical equipment and the power supply grid, and the grid capacity requirements are too high, and the startup is large. Current and vibration are extremely detrimental to the life of the equipment. After using the variable frequency energy-saving retrofit, the soft start function of the inverter will start the starting current from zero, and the maximum value will not exceed the rated current, which will reduce the impact on the power grid and the requirement of power supply to prolong the service life of the equipment and the mold.

Fourth, injection molding machine, hydraulic machine special power saver application range

    All quantitative pumps with proportional valve control oil system... one horizontal injection molding machine, vertical injection molding machine, die casting machine, blow molding machine, including single pump, multi pump system, single motor and double motor injection molding machine, power saving effect Up to 20%-65%;

    All variable pumps that use a proportional valve to control the oil circuit system... as for injection molding machines, die casting machines, and hydraulic presses, the power saving effect can reach 15-40%;

    All the quantitative pumps that use the directional valve to control the oil circuit system, such as horizontal injection molding machine, vertical injection molding machine, hydraulic press, large hydraulic press, can save 20-65%.

Five, installation and after-sales service

1. Installation of this power saver will not change the control and production output and product quality of the original equipment. All energy conservation is carried out under the premise of not affecting the production.

2. The warranty period of this product is 1 year. The service life is up to 8-10 years and it is maintained for life.

3. If there are technical problems in the use of energy saver, we can contact our company for technical guidance.

Six, injection molding machine. Analysis of investment benefit before and after installation of hydraulic press

Investment benefit analysis of a vertical injection molding machine with a 25-ton 5.5KW oil pump motor:

1, 25 tons of vertical injection molding machine: power is 5.5Kw: a = 5.5Kw

2, daily power consumption (b): calculated according to the load rate of 60%

b=a*b*24

=5.5KW*0.6*24

= 79 degrees

3. The electricity fee is 0.7 yuan/kWh, and the daily electricity saving fee (c) is:

C=b*0.7=79*0.7=55 yuan

4. Power saving analysis after transformation

Calculated at the lowest power saving rate of 35%

Monthly electricity savings (D) is: D = C * 0.35 * 30 = 55 * 0.35 * 30 = 578 yuan

Annual electricity saving (G) is: G=D*12=578*12=6930

Return on Investment Analysis (E):

1 A 5 5KW oil pump motor vertical injection molding machine, equipped with injection molding machine servo special power saver, after the transformation, the company can save 578 yuan per month, saving costs of 6930 yuan per year

The use of Power Saver for more than 8 years will bring the investment return of 6930*8=55440 yuan to the enterprise.

2 investment 20 vertical injection molding machines

It will be recycled every year: 6930*20=138600 yuan:

8 years will be produced: 8*138010=1,108,800 yuan

Seven, conclusion

1. Conclusion of intuitive power saving effect

    After the energy-saving transformation of the injection molding machine, the investment cost can be recovered in just 6 months according to the lowest power saving effect, and the equipment can be used for at least ten years. “Power saving is the fastest investment in the recovery period. The longest investment." Users can reduce actual electricity bills, save money, reduce operating costs, and promote business development.

2. Implied economic benefits

    According to the power-saving principle of the power saver, in addition to the intuitive power-saving benefits, the protection of the equipment and the line results in a prolonged operating life of the system, the heat generation of the device is small, the operating efficiency is improved, and the maintenance cost is reduced. Investors are also an economic benefit that cannot be ignored. Especially after the power saving reform, the electricity consumption is reduced by 20-40%, which reduces the power loss in the distribution network and improves the power efficiency of the transformer. The hidden economic benefits are also for the investors. A substantial gain.